Looks like Ford is offering a new 20" option for the Maverick street trucks in bronze and machined face.
M-1007K-M208B - MSRP - $1350 for a set of 4 with TPMS.
Looks to be taken from the Mach-E
As @Chops pointed out, this was on the SEMA 300T concept
I would recommend then, either check on the ranger forum if someone can give you the lighting wiring diagram for your year Ranger or go to the Ford Motorcraft website and pay to download the diagrams to help you.
yes, you're just tapping into the illumination circuit. I would verify the wire color first incase, that it's a violet/grey. It will be common to all the illuminated switches in the truck.
That wiring is for the Ranger. I just tapped the illumination wire in the a pillar. See post #44 For 2025 Mavericks it is the Violet-gray wire pin 9. I did not use the supplied pin, I just soldered my own connector to the wire, but you could just get away with a tap if you had to.
On my 2025 Desert Sand Tremor, I have done quite a few things....
Tint sides and windshield (a must for S. Florida)
Added ambient lighting to center console storage
Ambient lighting over door pockets
Lighted USB
Escape glovebox strut
Autochromatic rear-view mirror
Wrapped the dash port-o-potty...
I drive the Raptor to work and my wife and I share the Maverick. The Raptor is a whole different level of nice comfort, and feature filled compared to the Maverick, but the Maverick is amazing at running around town, parking, fuel efficiency, and just plain "fun" to drive. My wife says she...
It took some time, and a lot of patience. I bought the vinyl and adhesion promoter on Amazon.
CF vinyl - https://a.co/d/0DaGi5H
adhesion promoter - https://a.co/d/5rCwXh0
You definitely need adhesion promoter with the low energy plastic dash.
FWIW....Adhesion is definitely a challenge with the low energy plastics Ford used. When I did the vinyl wrap on my dash, I used 3M adhesion promoter to help. It made the surface tacky and I haven't had any issues a year later with the vinyl coming up on the dash.
Adhesion promoter -...