- Thread starter
- Banned
- #1
So those that are looking to go aftermarket wheels I put together some factory measurements to see what type of poke you will get.
The front and rear wheel well (top of wheel well) have a width of 72.6".
The front tires (225/65r17) measure 72.3" outside to outside.
The rear tires (225/65r17) measure 71.65" outside to outside.
This is with the factory 17" rim 7" wide 37.5et.
This leaves us with only .15" of wheel outward movement on each side before we start to poke past the top of wheel well up front.
The rear has a more forgiving .45" of outward movement before poking pass wheel well per side.
The front and rear wheel well (top of wheel well) have a width of 72.6".
The front tires (225/65r17) measure 72.3" outside to outside.
The rear tires (225/65r17) measure 71.65" outside to outside.
This is with the factory 17" rim 7" wide 37.5et.
This leaves us with only .15" of wheel outward movement on each side before we start to poke past the top of wheel well up front.
The rear has a more forgiving .45" of outward movement before poking pass wheel well per side.
Sponsored
