Maverick lowered on Escape springs, with 20" Rohana RFX5 wheels

[nathan.wright]

tailgate lettering is subjective, personally I prefer it as is but to each their own

Agreed, I'd actually much prefer if the tailgate had nothing at all. I am not a fan of the huge tailgate lettering all manufacturers have seemed to adopt.

Sponsored

 

[volksnuts]

You did ok - but I think your tires are too small. You aren’t filling enough of the wheel well.

That just means it’s not low enough

 

[austinzone]

That just means it’s not low enough

yeah - its not just height - but wheel well size. if it just needed to be lower id have said that.
just needs more of a set of meaty bois.

 

[2016BoostedGreyGoose]

Nothing wrong with this truck's stance. Consider it is lowered with springs meant for another vehicle...I call that pioneering. If ANYTHING, imho, only needs a tad bit lower in the front. Nothing a set of lowering spindles OR coilovers wont fix, when/if they become available. We are in the early stages of these little trucks. Most all of the ones lowered are considered "front runners" that have helped to pave the way for us. I am excited and thankful for all that jumped out in front. I cannot wait to be part of the crowd and share my vision...lol.

 

[David D]

Maverick by Joe W.

Lowered on Escape springs + 20x9 et38 Rohana RFX5 wheels in matte black

Before & after lowering springs.

Looks good . What did you do on rear camber because I can't find anyone that has an adjustable upper control arm. I lowered mine on the same springs but back wheels tuck in at the top .

 

[2016BoostedGreyGoose]

Looks good . What did you do on rear camber because I can't find anyone that has an adjustable upper control arm. I lowered mine on the same springs but back wheels tuck in at the top .

I dont think it's the upper.. but the lower control arm. There is an adjustable cam bolt in there. Mine slightly angle in at the top as well after the springs. Going tomorrow to have it aligned.

 

[David D]

I dont think it's the upper.. but the lower control arm. There is an adjustable cam bolt in there. Mine slightly angle in at the top as well after the springs. Going tomorrow to have it aligned.

When I had mine aligned the guy said that it only had a toe in adjustment but no camber but maybe he was wrong. Thanks for getting back with me on that and good luck on your project .

 

[2016BoostedGreyGoose]

When I had mine aligned the guy said that it only had a toe in adjustment but no camber but maybe he was wrong. Thanks for getting back with me on that and good luck on your project .

I'll leave room if I'm incorrect...lol it's a new platform for me but I'll report back with my alignment results and what I see and what the tech does.

 

[David D]

Ok thanks

I'll leave room if I'm incorrect...lol it's a new platform for me but I'll report back with my alignment results and what I see and what the tech does.

OK thanks. I think Magin Racing has adjustable rear uppers but not for the maverick yet so I might talk to a machine shop and see if they can make me up something.

 

[Mdanielswv18]

How much clearance do you have between the strut and inside of tire?

Sponsored