Anyone have details on how to change the splash screen?

[MankDeems]

I've taken delivery, within a month I ordered my Forscan tool and enabled all drive modes, TSR and disabled auto start stop. I cannot stand the weird maverick lariat Rendering splash screen. I've seen a few guys on here change the boot screen anyone have details? looks like most new fords have an APIM Module to modify them in but I think sync 3 is different? I'm able to enable "Splash screen" in the IPC Module but there aren't any options like I've seen on the F150 tutorials! let me know where I'm right, let me know where I'm wrong would kill to have a little more info on how to get the ST or RS Splash screen!

Sponsored

 

[NJBob]

Just seen a video. You hit the skip track on both the steering wheel and the audio controls at the same time. Brings up a secret menu where you can change that. Mostly change it to other Ford models. This was on a 2019 Mustang with sync3. Not sure if it would work on Mav. Sorry but can't find the link.

 

[NJBob]

Maybe this will work. Found the link

https://www.mavericktruckclub.com/forum/threads/sync3-hidden-menu.23367/post-440774

 

[Gullzway]

Maybe this will work. Found the link



https://www.mavericktruckclub.com/forum/threads/sync3-hidden-menu.23367/post-440774

That will reset every time you turn the truck off. Edit: didn't do anything on my Maverick.
Try this.

 

[MankDeems]

That will reset every time you turn the truck off. Edit: didn't do anything on my Maverick.
Try this.

I'll have to try this when I get it back from ford today. I have Ford my touch not sync3 because I have an XLT not a lariat. Will post results!

 

[Nunyabiznus]

try apim easy mode splash screen. might not work at 1st may need to turn truck off and on more then once

 

[MankDeems]

try apim easy mode splash screen. might not work at 1st may need to turn truck off and on more then once

Maybe I'm not understanding what you guys are saying but the tutorial does not seem to work. The XLT and XL mavericks do not have an APIM that's the point of this post is to find out

 

[RyonicXLT]

Did you ever figure this out? I’m in the same boat with a XLT model and no APIM folder to modify.

 

[MankDeems]

Did you ever figure this out? I’m in the same boat with a XLT model and no APIM folder to modify.

Never did, as far as I know 2022 XL and XLT mavericks don't have an APIM module because they have the cheapie radio.

Maybe when I do the Sync4 Upgrade after warranty is up I'll check

 

[Gregk]

and disabled auto start stop.

How did you disable A/S/S? I've been looking for a forscan method.

Thanks!
~g

Sponsored