3D Printing Files-Trash Can, Console Tray, Cubby

[trentobean]

I received my XLT Maverick back in March. I've been tinkering with some 3D prints to help it out. I've found out some of y'all have bought them from me on ebay and given the links here. Just thought I'd help folks out by giving my thingiverse links to the files.

Trash can for in front of console: https://www.thingiverse.com/thing:5381375
Console Tray: https://www.thingiverse.com/thing:5393377
Cubby Solution-52MM Gauge with Voltmeter: https://www.thingiverse.com/thing:5401301

Rear Storage/Trash can with customizable inserts (untested. Haven't printed this yet. No pictures yet, but the thingiverse page will show you a rendering): https://www.thingiverse.com/thing:5403694

The best colors I've found so far for filament:

Interior Blue: Fighter Jet Blue by Paramount filaments
Interior Orange (not a perfect match, still too bright): Orange-Red by iSanmate
I've got another orange coming that may work better. I'll let y'all know.

If y'all have any other ideas for designs, let me know.

Sponsored

 

[The Weatherman]

Love them all. Nice job!!

I particularly like the front console trash can. Would you sell me one and if so what would that set me back?

PM response is fine.

 

[Dad]

Love the ingenuity! I like the idea of the front trash since I'm the one using the truck most of the time and most likely the one needing it to be accessible. I didn't see any price listed. Can you post your eBay link?
Also, I have the Lariat, so orange wouldn't work. Probably the fighter jet blue would do well in the Lariat's navy blue and brown interior.

 

[respi133]

I've got another orange coming that may work better. I'll let y'all know.

which is this? I'm about to buy Overture's here but not sure if it will end up an exact match

 

[trentobean]

which is this? I'm about to buy Overture's here but not sure if it will end up an exact match

I haven't tried the overture yet, but it still looks too bright. The two I've tried so far are:

• Orange PETG by Eryone (Way too bright)
• Orange-Red PETG by iSanmate (Closer, but still on the bright side)

I've got a sample coming in of Perfect Orange PETG by Atomic Filaments.

If that one doesn't work, I'll work down this list.

• Rust Orange by Coex.
• Dark Orange by Devil Design
• Orange by Filamatrix
• Orange RPET by ReForm
• Orange by Azurafilm

I can only go off the hue in the pictures until I see them. I have high hopes for the Atomic Perfect Orange. Let's hope!

 

[respi133]

You're right, Atomic looks the closest on the monitor. I'll keep an eye on the thread and if it's bunk when you get it I'll work up the list. got my models squared away just need the right filament

 

[nunucello]

I received my XLT Maverick back in March. I've been tinkering with some 3D prints to help it out. I've found out some of y'all have bought them from me on ebay and given the links here. Just thought I'd help folks out by giving my thingiverse links to the files. I'm finishing up one more solid trash can for the back FITS slot, but still needs a little adjustment.

Trash can for in front of console: https://www.thingiverse.com/thing:5381375
Console Tray: https://www.thingiverse.com/thing:5393377
Cubby Solution-52MM Gauge with Voltmeter: https://www.thingiverse.com/thing:5401301

The best colors I've found so far for filament:

Interior Blue: Fighter Jet Blue by Paramount filaments
Interior Orange (not a perfect match, still too bright): Orange-Red by iSanmate
I've got another orange coming that may work better. I'll let y'all know.

If y'all have any other ideas for designs, let me know.

Great Work !!!

 

[trentobean]

Added a link to the rear storage/trash can on the first post in this thread.

 

[trentobean]

You're right, Atomic looks the closest on the monitor. I'll keep an eye on the thread and if it's bunk when you get it I'll work up the list. got my models squared away just need the right filament

Well, here's the atomic. Still too bright. I'm going to try the coex rust orange next.

 

[respi133]

I got some Filamatrix coming this weekend

 

[trentobean]

Here are examples of the rust orange. It's the first one I found that is too dark, but at least it appears to be kinda in the same hue. I'm going to reprint my cubby gauge thing in this and see how it looks.

On a side note, whoever the representative I was in contact with at Coex is great. He sent me 6 different color samples for free, and has mentioned they have been eying the Maverick to try to match its colors. He said supply chain issues are a problem for him right now, but may add colors in the future.

 

[respi133]

Very nice glad to hear there may be a perfect match coming soon too make sure to post your coex cubby!

 

[respi133]

Filamatrix came in, slightly lighter than Mav trim

Close enough for me to use it until we get a perfect match for sale.

 

[trentobean]

Filamatrix came in, slightly lighter than Mav trim

Close enough for me to use it until we get a perfect match for sale.

I've looked and looked. The only place I've found that I can find a good match is out of Europe and charged more for shipping than for the product. I'm now trying to find a spray paint that matches and see if it sticks well.

 

[respi133]

Yeah I'll stick with the Filamatrix for now and just deal with the color difference - there's bound to be a matched filament soon, even if only in ABS

Sponsored