Search results

Thanks for your willingness to help. Between XLT and XL not much difference but if you able to have your hand on Lariat I would say switch the IPMA to see if they are cross compatible.

I stumbled upon this thread reading word safer. That is a wrong choice for title. Rather makes sense to say ‘is 2025 more distracting?’ I thought restraint or other safety features are compromised and worried for a while. The 2025 is no safer or worse than prior models and buttons are completely...

Thanks for looking for. If you have a paid Forscan I would say save a debug file as said in the link below and send to Forscan to look for potential issues of not detecting CCM while trying to retrofit. If its on Forscan they will work on test build and let you know. That is how I got...

Here is the link https://forscan.org/download/FORScanSetup2.3.67.test20250621.exe I already calibrated so it works it is just that it doesn’t let you know when it is done. Run for 15 minutes and stop the calibration, it says ‘success!’ See if you able to see CCM with this version.

P Your theory could be correct or the issue is Forscan. Just today I received the 2.67 test release from Forscan for IPMA calibration. It could be I will be able to discover CCM with this version. I will test out. I broke my connector so I am waiting for my new connectors to be delivered.

19-01 to 19-04 is your Vin in hex. I am with Colinl, it may be encrypted or such thing so farscan is not smart enough to read modules.

This is where I hit the dead road. I think Forscan is not yet capable of Calibration and CCM stuff for 2025 Maverick. Are you able to see if you have option to do camera calibration for IPMA in service menu?

I wish we have some helpful guys with 2025 Lariat here in group. It is just folding the back seat down and taking a picture of connector of IPMA. Any 2025 Lariat owner chiming in to help. No tools needed just wanted to see how Lariat does it?

Could any of you with 2025 maverick check if you see camera calibration as bluespec1 mentioned here? I do not see that option. I am having conversations with Forscan contact but just checking it is not my hardware issue. Could it be my connector? I have the one attached below. TIA.

Though I appreciate your effort, I would advise connecting temporarily first to see if works. Once found CCM communicating all these harness route can be ironed out.

I had pins available for another make shift pigtail. I put those in the IPMA pigtail at 9 18 19 20. CCM never got recognized. I think either those pin number were not correct or my CCM had gone bad. I had connected everything temporarily so after that I reverted connection to the factory config...

At this point I ran out of options. On touch my CCM module is warm-hot. There are some menu in EZ side of forscan in IPMA. I could enable ACC like set radar to present and fusion radar like that. When tweaked those, I got a message like lost communication with CCM?( Didn’t take pictures, talking...

Surprisingly my backed up Asbuilt before I do anything and I downloaded from motorcraft service is different. I did not see any difference it made but some code gets updated. I assume same for Lariat.

I did not check this but there was activate adaptive cruise control in EZ menu. That didn’t do anything. I will try this later.

Alot IPMA blocks are not available for me to update. Any block with number 3 and on are not in the car( crossed out in my markups). I didnot want to update half. I took the notes on old sheet what I found different. Anyone with 2025 maverick CCM could share some of these numbers from their...

I scanned as a new profile but I didn’t change anything in IPMA yet, if that’s the case I will try again when it is a little cooler outside. Adding pin was hard part. There was no pin in 9, 18, 19 and 20. I added and checked with multimeter for continuity.

I I connected my old module but CCM is not detected. Could it be Forscan version (2.3.66)? If compatibility, I would’ve at least see DTC? I have saved a firmware for CCM which is proven worked with Maverick from fcolo but here I didn’t even get chance to update it. Do you guys think, I need to...

I understand your point but I see tinkering is more of a character and taking pride in making your car own and standout from pool of cars but not for saving money. Yes, probably who is just for saving shall look into higher trims. I am more into CCM so I could have Open Pilot and then some of...

I might say something more than half of you already have, Adaptive Cruise Control.

The part list is awesome and appreciate the effort you invested to keep up with, Hope the difference between Lariat and XL is just for 360 camera. I noticed my CCM assembly is different, based on pre 25 model CCM, but I am hopeful at least it gets detected.