Sponsored

Search results

  1. ForScan increase power limit before switching to gas. Hybrid

    Does anyone know if it's possible to increase the power limit before the engine goes from electric to gas? From what I can tell if I Go easy on the accelerator and stay under 10% power it will stay on electric. Once I get past about 12% it switches over to gas and I was wondering if we can...

  2. Looking for photos of hybrid undercarriage

    I lifted the truck after installing my LEDs and there was no issue with clearance. They get tucked away enough.

  3. Looking for photos of hybrid undercarriage

    I don't have pictures currently but I'll post some up when I get the chance to show were I put mine.

  4. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    Sorry for the late reply back, I have just been figuring out how to get as much cu ft possible and this is what I ended up with. I'll have to purchase a different sub to match the space. Ended up with 0.423 cu ft. Box dimensions are 6.5 bottom 13 height 16.25 width 4.25 top subwoofer needs...

  5. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    The 10 inch sub is working out very well and I should be finishing up the box hopefully this weekend. Definitely go with shallow mount and you can make it fit. I'll post some pics of the final design.

  6. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    You could be right about that. I know when I tested that out at first before putting in the sub it did cut out the back with driver mode selected. So I just tested it out putting on driver mode and it did cut out my sub.

  7. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    I'm still fine tuning the box to get the most out of it. I ended up buying some m6 30mm bolts to get a bit more clearance in the back. For now it sounds good with the box I put together with scrap MDF I had laying around. I might have to buy a different sub that requires less cubic feet. The...

  8. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    Using posi-Tap connectors is a bit more secure and won't get pulled out. T-Taps work don't get me wrong it's just not as secure as other taps.

  9. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    I agree the T-Taps were not my first choice but it was all I had available at the time of testing. I will be replacing them with Posi-Tap connectors once they come in.

  10. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    Currently my sub is working without any issues using the rear speakers for the source. I did also see that others were having problems but it worked fine for me. I did use this converter which maybe helped with that problem, I don't really know for sure since I didn't encounter that issue...

  11. Rear speaker wires for sub install -- use this location to tap into the left and right speakers

    I am not sure if this has been posted before but for people that do not want to replace the rear speakers but at the same time install a sub and amplifier. You can use the following location to tap into the left and right speakers. Should make it easier considering you won't have to dismantle...




Top