Search results

There are plenty of trailers at or near 4K lbs that a WDH are helpful for. No one is saying to use a WDH and then go and tow 10k pounds. The purpose is to redistribute weight which will lessen the tongue weight and rear squat and create a better towing experience. Ford has shown if you can’t...

10” sub and your box is shaped like a trapezoid? How much volume did you need? I can confirm the 4X6 speakers do fit. For the Skars you have to drill your own mounting holes and they go in with no problem. The adapter worked for connecting to the factory harness but the other end where you...

Yes that’s correct. On that Calc I forgot to actually subtract the 1 on the last number.

I don't have any pictures before I put on the carpet. I used pocket screws for the first one because I wanted to dry fit it before gluing. If you use pocket screws you have to fill all the holes. Took way too long so for the second one I shot it with my nail gun. I used a lot of glue for both...

I don’t have any pictures of the cut out but it was right against the edge. We are talking maybe a 1/16th of an inch between the end of the cut out and the inside of the side wall. Sub wasn’t rubbing against the side though. It helps that the sub is just under 7.5” so that little bit of play...

Thank you. Was my first time building speakers boxes. Carpet looks great on the tops and the long sides. Not as pretty on the two ends I can for sure see the seams but with the way I am putting the amp in the middle no one will ever see that. Building furniture is one of my hobbies so building...

https://a.co/d/g1l16QO I've seen other people use these with no mounting adapter. I'm trying these. https://a.co/d/cl9MoWS I Haven't gotten to actually replacing all the stock speakers as I have been focused on getting the sub boxes built. Hoping to get to installing everything this weekend...

https://www.skaraudio.com/products/vd-8-inch-car-subwoofer This is the one I bought. It’s a shallow mount 8”. https://www.skaraudio.com/products/rp-1200-1d-car-amplifier This is the amp I’m using. https://www.skaraudio.com/products/rp-1200-1d-car-amplifier

Sure thing. I haven’t wired everything up yet. But this is my plan. I’m running 2ohms subs and my final load at the amp will be 2ohm so I will wire like this. These are 2 coil subs so they have 2 positive and 2 negative. You connect the a positive to a negative on each. Then I ran the other two...

I’ve seen a lot of posts here with custom built boxes for under the seats. I wanted to show the setup I made since a lot of the builds involve a non-square box or modifying the space in some way to make it fit. I wanted to do something very straightforward and simple that could slide right in...