Search results

I frickin had the trim out and battery leads off in about five minutes and then went to loosen the 10mm bolt that goes thru the floor for that clamp that keeps the battery in place. Dang thing snapped right off, the factory put loctite on the threads, was able to drill it out with a smaller...

Hi Tom, i just got one of these for my 2022, out of the box my volt meter reads 12.6 volts, manual says it should be at least 12.7 volts, did you charge yours before you installed it? I see they need a special charger that i don't have yet.

Don't have an AC shutdown sequence but I will do your procedure, makes perfect sense, thanks John Deere.

Hey i got lucky too, got a 25XL AWD Hybrid from a dealership that had ordered one for stock, exactly what i was going to order before the tariff monster f'ed everything up. I found out about the higher CCA AGM battery. I opened the 12v box when i was inspecting the vehicle while picking it up at...

I called Ford Customer relations/service line today about my 2022 Hybrid doing this, Yvett said ask the dealership if they will perform SSM53801 for free as my bumper to bumper is expired. But from reading this entire thread i think I will hold off and possibly just buy a new higher CCA AGM...

O.K. thanks, i was thinking of getting an extended warranty beginning of next year to extend myself until May of 2028, decision made. I already had a new tranny put in at 6500 miles.

I don't understand the OP's quote of " If a vehicle has already exceeded either the time or mileage limits, this no-cost repair will last through July 31, 2025" What does that date mean?

My Ford dealership tried to program my Cruise back in, he tried ISP and the newer version that the tech's use and it wouldn't let him do it in either. We talked about Forscan and he said there are tech's he knows that use Forscan for there own Fords and do side jobs with it. They were bummed...

Its really not a hack, its OEM Ford parts, Ford software, the XL did not come with Cruise. I'll find out in the morning and report back.

So do the dealerships have forscan that they could reset my Escape wheel BCM back to "Enable Cruise Control"?

My 2022 Hybrid goes in tomorrow morning, i had and Oil Change, tire rotate and the Fire recall done, BCM software update, taillight update, they didn't do the gauge cluster recall for some reason. 8 days later when i tried to engage cruise control, nothing. All buttons and switches on the...

Adding a second electric motor in the rear from what i hear is less moving parts and less expensive to make vs. normal rear wheel drive components. I would want the plain jane XL package and i hope it comes in at $27k or less MSRP.

I had to take mine back for that issue after the recall, one guy in the shop knew exactly how to fix it, took five minutes. He said the clip or clips in the middle got misaligned thats why it didn't just pop back in with pressure. Take it back and have the clips positioned right and they'll snap...

Jsus, do you think the battery cable crimp issue would cause my battery cold cranking amps to diminish over time as the battery is not getting the full re-charge while my Hybrid is running? Last time i had the truck in to the dealer they said the CCR was marginal at 270CCA, voltage 12.61V. I...

My dealer fixed it in 5 minutes at the 2nd trip for the sag, the tech said they had to adjust the clips where the headliner snaps into, they thought it might be a half hour or 3 hour job but a smart tech knew what had to be done, giddi up!

Dammit, just noticed mine was loose/sagging also a couple days ago, i had the recall done last month. Tried popping it back up, must be the clips were broken at recall fix. Maybe I'll take another crack at it and try finding the clips, dealer is 80 miles away round trip.

Yup new transmission coming from Detroit, its on its way, i was very surprised that it was available. Going to the dealership tomorrow, they have a loaner for me, whew thank goodness, i thought i was going to have to fight Ford corporate. C.S. said i had to foot the bill for a Rental if it came...

J Just know if there are any in these tranny's from my years and years of experience in the paper industry buying and inspecting quality high precision spherical bearings and bronze bushings and other components. You have a bearing fail prematurely in a paper machine roll in the machine and...

Exactly, maybe a chinese supplied bushing or bearing eh, new tranny is on its way, 3 day lead time they said.

UPDATE: New tranny is in, works great so far, put about 40 miles on it to charge all batteries. Dealership diagnosed this morning, tranny failed on my Hybrid XL, lurched to a stop as i was traveling approx. 35mph coming home from a 210 mile trip Friday 09/23/22, got 10 miles from home. I...