Search results

I have one on my truck, and have installed literally thousands of them at the dealership I work at. They work well and install easily. If you don't mind carry a separate one button key fob you can extend the range quite a bit with the antenna add on.

I use Forscan Lite on my android phone and it will show any PID data you can find, including transmission temp. Plus no annoying ads popping up.

I put some headrests in my truck from a 22 Mustang. They're the ratcheting adjustable kind. It matches my XL interior really well. The only difference is the stitching from the mustang is a little different, but hardly noticeable.

I have an XL hybrid. The camper empty weighs 1450 lbs when empty. The truck handles it quite well.

I have the same issue with my truck. My battery drain test shows .01 -.02 ah draw at rest, which is well within spec yet I regularly get deep sleep notifications and had to jump the vehicle twice in one week. Is there something you can check with my VIN?

I transferred the motor assembly on mine, it makes the job much easier.

Is the fuse blowing immediately when you press the switch? If so, I would check your wiring. It sounds like you either have a short or the switch is wired up wrong. The motor shouldn't be a very high amp draw.

It's a T55 torx non plus.

Thanks for the time code, I'll check that out.

I also had the windshield "ticking" sound coming from the lower right corner. I had the windshield removed and resealed. That fixed it for a little while, unfortunately it shifted the noise to the lower left side of the windshield:cautious:

That's the part number I used and it doesn't look like it changed. It lists motor and lumbar adjuster under the other names section.

I used a couple of blue size speaker spades to make the motor connection. https://www.grainger.com/product/POWER-FIRST-Female-Disconnect-with-Copper-24C709

Hello from Arlington!

I installed the Katzkin seat heaters in my truck. They were kind of a pain to install because of the amount of hog ring attachment points inside the seat cushions. It's definitely doable though if you're handy. The thing I like about it most is that it takes the edge off the cold during the...

As I said before, the antenna extends the range of the one button fob. It won't affect the original fob in any way.

What you need is KN1Z-19A361-A. The antenna your wanting to install only extends the range of the single button FOB that is another add on. The part number for that is JS7Z-15K601-C. It installs very easily behind your OBD2 port. It will not affect your factory remote start.

Representing the greatest nation!

I have to admit, that loader had me pretty nervous. Luckily he was quite good at his job.

I can confirm the update fixed the brake issue for me. Last night I took the family through a very popular neighborhood to see the Christmas light displays. We were in stop and go traffic, almost all of which was below 6 mph, for almost 2 hours. I didn't get a single brake grab the whole time...

I have done a few things to mine as well, none of which involved the ABS module. I don't think it's anything to worry about. In my experience dealers aren't just looking for a reason to invalidate a warranty claim.