Selling two OEM Ford bed cubbies. Great shape, one of them has two holes drilled into the interior for (2) schrader valves (Airlift bags).
$60.00 for both
Selling (3) Maverick/Bronco Sport/Escape steering wheels. Two of them are leather with heat, one of them is ActiveX with no heat. The Active X steering wheel has standard controls with cruise control, one of the leather wheels has buttons for ACC and the other has standard CC buttons.
$175...
These are the actual PTM parts from Ford matched in Area 51, professionally painted. They do not have the dimpled, textured finish like the standard XL and XLT mirror caps have, they are a smooth finish and perfect match to Area 51.
$250 shipped
Part came out of an ecoboost Escape so you would need to just swap out the cover buttons to include the blanking plate to go in place of the rear defrost button. Could be programmed to work with a hybrid via Forscan. I had planned to add heated steering wheel and seats to my XL so I had this...
For the Ecoboost Maverick only. Will include all required hardware plus the rivet nut install tool and an 11mm drill bit required to install the rivet nuts. No damage at all.
$200 $180
https://www.methodracewheels.com/collections/standard-wheels/products/314-matte-black?variant=39290192461885
Wheels are 26lbs each and have a really high load rating of 3,640lbs. They are also hubcentric with a 63.4mm hub bore meaning no need for centering rings. No damage or curb rash at all...
Maverick FX4 IPC with roughly 23,500 miles on it. This will include the 5 button center console switch required to get hill descent control working. You will just need to either buy the center console harness or add a 12g wire (that is what I did).
$200 $175 for the IPC and switch shipped.
For those of you who have said you want a 16" wheel option, Method Wheels apparently has an option for you. They offer their MR707 beadlock wheels in 16"x7" 5x108 bolt pattern with the matching 63.4mm hub bore. The caveat is that only their 15mm offset version fits. I'm guessing that offset...
Just tried installing the JCR Off Road catalytic converter skid plate and there's not enough clearance. The exhaust rattles on it. No amount of adjusting could get it rattle free unfortunately. I took video and I'll be reaching out to JCR to see what they say but hopefully this is just an...
Just because it's a super cheap item that broke doesn't mean it still doesn't bug me. So far in a year and a half of ownership I've had the following Maverick parts failures:
Leaking automatic transmission start/stop accumulator
Both front half shafts with leaking CV boots
Unfixable rattles in...
Wheels come with the appropriate aluminum hubcentric rings and TMPS in all 4 tires/wheels. Less than 3k miles on the OEM spec tires. No punctures, no repairs, no damage at all to the wheels or tires.
$900.00 $800 obo
A little less than 2 weeks ago I received a quote from Carvana to sell them my 2022 XL AWD Maverick for just about $30,500. A family member is in the process of purchasing a new vehicle and offered to sell me their old vehicle at a great price which would have replaced the Maverick. I followed...
I'm trying to figure out an IPC (Gauge cluster) swap from a different model. Unfortunately our vehicles are too new and Ford does not yet provide calibration files for the Maverick on their IDS site. If someone who has the new beta version of forscan where you can update modules would be willing...
With all the talk of accidents lately, stay vigilant. I've been riding motorcycles since the 90s and made a habit early on of checking both directions at an intersection to make sure vehicles are stopped/stopping. This happened a couple of days ago but an older dude, probably 60's or 70's was on...
I wrote in another thread that I had a leaky CV boot and that when investigating I found transmission fluid on the driver's side half shaft and lower control arm. Yesterday I took the wheel and engine splash shields off and it appears that the trans fluid is coming out of the breather tube on...
Getting ready to decide on what I want to do for a very mild lift for my Maverick and thought I would post Ford recommended torque specs from the service manual. Most of the lift manufacturers don't include torque specs for some reason. Also, I've seen this done incorrectly on just about every...
JCR Offroad makes some really cool parts for the Bronco Sport to include skid plates that replace the engine panel and fuel tank panels and they have long panels to replace the felt pans in development. They also make a plate that covers the cat converter on the Bronco Sport that I think a lot...