Search results

I can’t be the only one this will happen to: Dog chewed my driver’s seatbelt buckle. To replace your front seatbelt buckle, you’ll remove the four plastic tabs, exposing four torq size T-55 bolts. From there you can move the seat a bit and expose the seat buckle itself. remove one torq size...

I’ve been trying to repair seatbelt because of the “restraint indicator lamp” warning.… So I unplugged the electrical harness to my drivers seatbelt and have two pins. Tested for continuity. I was going to check a known good one in the passenger seat and found it had five pins and a small extra...

Has anyone else experienced a consistent idle surge? it’s happened for me a few times. The truck will be idling and surge up in revs and back down, consistently until I either turn the truck off or turn off the accessory that is making the truck want to idle (like the interior blower heater) I...

I was looking for part numbers for the cabin air filter and found that the hybrid trucks may have an air filter that filters the battery system cooling? can anyone confirm?

Not sure how else to title this. Was just on the freeway holding steady around 65 in regular drive mode. Under the peddle, as if in the background, I started to feel a consistent (about every second) what felt like a charging surge. The truck would lag ever so slightly while the surge was going...

I’ve noticed in my hybrid thst when I put it in Sport Mode and give it some beans the engine found is fantastic. When I step in it in normal mode, even full throttle, it doesn’t sound anywhere near as good. do you think we have that fake engine noise through the speakers bit going on here?

I’ve read that some people have experienced issues after using remote start with the hybrid. im having trouble figuring out what exactly would be an issue? what part fails?

If you are cutting 2x4’s to make a second bed layer, cut them to 55”….I would suggest chamfering the edges.

Been working on the maverick XL bed and wanted to let you know that the upper “flex” rails are pre threaded and are M8x1.25. The other anchor points require a tap (M5 drill bit) and use an M6x1.00 bolt.