Search results

We removed shutters 1, 2 and 3 and trimmed a small slice off #4 shutter to give it more room on rotation so it would not hit the base plate and tested that today. No fault or error. I guess we will figure out a way to secure the bottom of the fascia without using the front screws until Demco...

By any chance do you have the 4k tow package? It came with a large radiator. Wondering if that could be part of the issue or some change Ford made. We removed shutters 1, 2 and 3 instead of what they recommended because we thought the tow bar would interfere with them. We have only run the...

Thank you so much for all your help. We will be trying once more today to get the fascia back on. I will let you know how we make out. On to another question... Is your Maverick a Lariat by any chance? Our tail lights are not behaving as expected when in neutral tow and connected to the RV...

We are getting closer but still have about 1/4 inch before the holes on the bottom of fascia line up with the holes on the bottom of the frame. It looks like the plastic inset behind the fog lights on the interior of fascia (see image below marked in red) is hitting the corner of the base...

How many washers did you use on the baseplate and on the support arms? We are having trouble getting the fascia back on. We discovered that the clips on the plastics inserts for fog lights was interfering with the fit so we trimmed those and that helped but we still can't get the screw on the...

Looks great! We are trying to put the new Demco baseplate (9519366) on our 2025 Maverick and the fit is extremely tight over our ACC module such that we cannot reach the screws on the right side when one screw is loosely used on the left side. See pics below. Did you have trouble fitting it...

We purchased the new Demco baseplate but are having a tough time fitting it over the ACC and being still able to screw the base plate onto the vehicle. Do you have any tips or picture? We followed the instructions but are finding the tolerance to be way too tight. Waiting until tomorrow to...

We have almost the exact same setup. 2024 LTV Unity FX (Eurosport color) and a 2025 Ford Maverick Lariat white with black out pkg and 4k tow pkg. We are installing the Demco base plate, RVi Shadow 2 brake system and RoadMaster Diode universal wiring kit. We have installed the RM diode kit but...

Anyone have success with install the diode wiring kit on a 2025 Maverick? We installed it but only the top portion of the tail lamp flashes with the turn signal instead of top and bottom when the Maverick is not connected to RV and in neutral tow. If you look at all of eTrailers diode wiring...

We are in the process of setting up flat tow as well for our 2025 Maverick Lariat and we were told by eTrailer AND roadmaster that the brake light relay is NOT needed on the 2025 anymore. However, we are having an issue where the tail lamps are not flashing in the same manner as when the...

I dont see and pics or attachments. Where can i find them?

Could you explain and/or post pictures of where you drilled through the Maverick firewall to run the cable for the brake pedal? I assume this is the RVi Shadow kit, correct?

Did you ever figure out where to drill the hole for RVi? If you did, could you post pictures?