Sponsored

Search results

  1. Full digital gauge cluster from Ford Escape swap into Maverick

    If you're doing a software update with FORScan or UCDS or something it would go over HS3. For now at least the ethernet isn't required, it's just used for OTA updates from the TCU. Ford could change that in the future I guess but as of now you can unplug all of the ethernet in the car and it'll...
  2. How To: Sync 3/4 swap for non Sync 3 XL/XLT

    You'll have to put your old system back in, re-enable FordPass, then put the Sync 4 back in. You can't enable it with Sync 4 but it will continue to work if enabled. Just don't Master Reset the Sync 4.
  3. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Someone sent me this today and I decided to do a deep dive here and figure it out. Make sure hybrid is enabled: 7D0-02-02 xx8x xxxx xxxx Enable the power flow menu: 7D0-02-02 xxx6 xxxx xxxx WITH climate bar enabled 7D0-02-02 xxx4 xxxx xxxx WITHOUT climate bar enabled (what you have pictured)...
  4. How To: Sync 3/4 swap for non Sync 3 XL/XLT

    The harnesses are also sold here with $50 discount with code mavericktruckclub: https://oemplusupgrades.com/products/2022-2024-maverick-sync-4-upgrade-harness?variant=50324636074264
  5. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    You have Lux if you have factory navigation without CarPlay plugged in.
  6. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Yes you won’t have to plug it in to use CarPlay anymore. The warranty isn’t impacted by this swap unless it’s a part directly related to the swap. For example if your seat motor stops working they’ll still fix it, if your audio stops working they won’t since you’ve replaced the original parts.
  7. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    One other update...we also launched the lariat kits and harness for those with a lariat wanting to do the sync 4 upgrades. They're both less expensive than the XL/XLT kits due to needing less parts. mavericktruckclub code works on those too...
  8. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    That’s correct. No new ACM and a simpler harness and no APIM bracket to install since you already have it.
  9. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    The Sirius XM tuner is included. I haven't actually tried it yet but it does have one. I'll have to add that to the list of things to check out. Personally I use the SXM app because its higher quality, as long as you have cell service. The mavericktruckclub code gives you $50 off of that kit as...
  10. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Yes XL and XLT. They are available now! I also have one that works for the Lariat. The harness for the XL/XLT: https://oemplusupgrades.com/products/2022-2024-maverick-sync-4-upgrade-harness Code "mavericktruckclub" for $50 off.
  11. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Harnesses are finally in and 1 more revision to the bracket and I'm hoping to have them shipping by the end of this week! Harness works with both upgrades to 8" sync 4, 12" sync 4, and the 13.2" escape screen. Bracket is only for the 12" transit screen.
  12. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    It won't let you do it. It will not show an available update for that VIN.
  13. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Sweet, I will post when the bracket is available (hopefully this week), and harnesses are about a month out. It just takes a while to get the connectors to build them in bulk. It's way too expensive and time consuming to build them with the pigtails like people have been doing.
  14. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    I'm probably going to retail it as $249.95 for the bracket & harness with $50 off for the forum members. So $199 for you guys. I'm not sure if that sounds reasonable to you guys but thats what I'm thinking.
  15. Sync4 APIM and 13.2" Screen Installation Guide (Lariat Models)

    Working on a bracket for the 12" screen as well as a plug n play harness for it from base model truck and from lariat trucks (already have that harness done). It'll probably be a month before I have harnesses in stock but the brackets hopefully will be this week or next! This will allow the...
  16. How To: Sync 3/4 swap for non Sync 3 XL/XLT

    Hey, been a lurker for a bit and my good friend bought a 2022 and we wanted to do this swap. Thanks to zackmd1 for the work here, he was helpful when I was doing this stuff on my Mustang a loooong time ago! I own a company that does Ford upgrades and decided to make a plug n' play harness for...




Top