Search results

Well I really wanted the NLA Ford cover, but don’t feel like calling up a bunch of Ford dismantlers across the country, and I don’t want it bad enough to pay this much… https://www.ebay.com/itm/295563454201 😳😳😳

I believe you’re correct, that initially I may have shopped Hiller but it “became” the name I noted when the order processed. Thanks for pointing that out👍. And no, I intentionally did not order that $4+ nut because I have some leftover fasteners from my former ‘89 Mustang that might fit, or...

On Friday Sept 15, 2023 I placed an order from https://www.fordpartsdistributor.com/ for the Lincoln Nautilus engine cover and mtg studs. Later that same day they emailed me that the parts were “shipped” (likely boxed and FedEx labeled - still…that’s quick). Tracking shows estimated delivery...

After reading posts on the underseat vault, I recalled that I still had one of these cable type safes that I had yet to use in my previous vehicles: https://www.amazon.com/gp/aw/d/B00FATWGSU/ref=ya_aw_od_pi?ie=UTF8&psc=1 I ended up looping the cable around the lower rear seat pivot tube - for...

Agreed. After looking at a bunch of hanging felt or canvas type bags of different sizes, as you pointed out since there’s not a lot of room back there when the rear seat is in position, I finally settled on these two bags that I already had sitting in a closet👍.

After taking measurements and comparing to a handful of different rear seat pet covers on you-know-where, I ended up with this cover which fits the Maverick surprisingly well. I also like that this one is of a “stiffer” material vs softer quilt type, so it’s not likely to get pulled up or...

Compared to the common VERY blue interiors of the 60's... 1966 Chevy Chevelle SS396 Coupe - Tropic Turquoise

Would've been nice to have as an option...

After reading others' recommendations and reviews of tonneau covers, I had decided on the Truxedo Pro X15, because I liked the look of the matte twill material and also wanted a simple roll-up. I believe I saw these priced at $467...

So does this chart mean single digit options (commodities) and packages (groups) such as the Tremor and Tremor Appearance, hard tonneau covers, etc., are VERY limited in supply and as such would likely cause a delay if you added these to your order?

Hi Ryan of Flated Guy. The member's comment above prompted a question in my mind - if cooled a/c air from the cab is allowed into the bed area through the open forward window of your topper, how well or long would you say that air remained cool, say if you did have dogs in the back or even an...

Yep I noticed the slits but wanted to add a bit of theft-proofness so I unbolted them and remounted the plates on top. But the next day I decided there really wasn’t that much of a chance some clown would steal the rug since it’s custom fit for the Maverick, plus it did look better on top of...

I personally haven't crawled underneath yet to check those. I believe the large bolt holding down the D-ring is M8 (TP40), the sidewall tie-downs M6 (TP27), and I discovered the 8 small screws on the tailgate panel are actually sheet metal screws (TP25)!

My last auto purchase ever…………unless Ford builds a twin turbo version of this along with handling upgrades that allow it to outdo the likes of Vettes or Porsches, and also credit me $35k for my current Mav towards this limited edition STT!😁

I hoping, and guessing not 😅! But as far as other areas including the undershield or skid plate, etc, since we know 3 different sizes are used in the bed, might as well pick up a set with a good range of sizes like huunvubu did so that if the torx plus shows up anywhere else, you already have...

Well I plan to install my recently delivered Bedrug in the next day or two, and may remount the two D-rings on TOP of the forward end, so I’ll make a note to check the thread size on those bolts, but I’ll remove the other two sizes of torx plus and measure those too, and update all the sizes...

After a quick search here, I did not notice any mention of this type of fastener nor it's "correct" bit, which I quickly learned is NOT the same as a regular Torx screw/bit, as applying a regular torx bit could strip your torx plus OEM fasteners/screws/bolts due to the bit's loose and improper...

Personally, I feel they did...our 2.0L Mavericks(y)! Both turbocharged, both AWD, but in our cases we also get a full crew cab, and in many ways just better all-around because of it's newer technology and efficiency(mpg), suspension and handling, braking...at least, this is how I've always...

Here's mine. The second door opening went a lot quicker - maybe 30-45 seconds total with the Dremel, opening it up very little to just be able to push in the threaded lock shaft. I went into Home Depot looking for a specific lock but they didn't have that one, but the one I purchased worked...

Are you sure those aren’t the carpeted mats, but with the rubberized undersides showing through the plastic bag?