Search results

Sorry for the late Sorry for the "very" late reply...Ive atteched a few pictures of the installation, very similar to a stock rear aid. You don't need a separate speaker it will use the radio speakers and lower the music volumen automatically when reversing. I was about to drop this project...

nope, im trying to buy the 2 day license for FDRS and the web gives that error, so I was wondering if it happened to you too... https://www2.helminc.com/ngsm/purchase_step1.asp?u=pipots&src=motorcraft

Hello! Just a quick question, I'm trying to purchase the 2 day licence but get an error. I contacted motorcraft but just wondering if you went through this too and solved somehow> error> Microsoft VBScript runtime error '800a000d' Type mismatch /ngsm/purchase_step2.asp, line 205

@Darnon quite late, but did you find out if the function is available?

Hello @JX77 I think you are closer than you think and your only problem is wiring between the PAM and the rear harness. I'm using this config and got no problem with rear sensor functionality and manage to erase all other codes except the DTC U2100. Can you post the configuration of your used...

Hello @JX77 , Ive just had a few hours of testing and I think I'm a bit closer now. Actual status: I've detected the PAM with forscan and also, I have the park aid and distance detection on the display. So, the system does work. I installed the sensors on the rear bumper and everything seemed...

yes, @AutobahnSHO you are right. My point is I'm trying to find out if I can only add those and the mirrors and not the whole 360 pack.

Hello, could you please elaborate on your model and trim...Im thinking if its possible to retrofit just the blind spot monitor and not the complete 360

Very late response, but im almost complete with this DIY and some were wondering...look at my other thread: https://www.mavericktruckclub.com/forum/threads/help-on-forscan-for-rear-parking-aid-%F0%9F%99%8C.36716/#post-862274

Hello! after a few months...we are getting close to a final installation! I was actually on the right track just needed and extra eye to look at a few errors on connecting cables, Thanks to @psang.92 we are now just on final details. So stay tuned for details, but basically when everything is...

hello! @jjx78, actually im a step behind you, i havent figured how to load the as built on the PAM...I've activated the module and settings on the different option with forscan, but havent figured out how to load a setup on a module.. can you share how you did it? I'm going to check all the...

just came back from a trip, I'll try this, thanks for the advice!

done!

I'm on a crazy crusade to add rear parking aid to my Lariat (Latam/chile). I already have all the pieces and studied the wiring and connections needed. I've loomed and wired everything from the PAM to the rear sensors and to the BMC, including connections to the MCNetwork, following all...

Hello! Darnon, where do you get those diagrams? I'm trying to find where connector C222, C201 and C207

Hello TMachus, I have a South America Lariat, which doesn't include the cargo bed lights :( I'm installing a led strip but wanted to follow your method to add the full functionality, with the strip working together with the over cabin cargo light. So a few questions: - According to the full...

yup..but then, forums like this, would be pointless

Hello Mavs! Felipe here form Chile, with a crazy project to add rear parking aid. I've found wiring diagrams and all needed parts and I think is possible. But while parts come in, I need to request help if someone with the lariat luxur package can send me detailed pictures of the back of the...

Hello Martin, (felipe from chile, trying to do the same). I did all the work, even bought some parts and its possible, but unfortunately, beside the basic sensor, module and wiring you have to change the main truck wiring. If you still think is worth, these are the parts: - NZ6Z-14A005-CRA full...