Search results

2025

It does, but not for nearly as long.

I have also found that my idle is higher and longer than usual. I've found the colder it is, the longer it will idle high. During the very cold months here, it would idle 1500-2000rpm for 5-10 minutes. When I would get in and put it into drive it would go back down to under 1000.

Yeah I'll have to look into it tonight. In my opinion dual climate is just a gimmick. I'd rather just have a single temp for both sides. How much of a difference does it truly make ha

Canada, Lariat, No Recirc button on homescreen. Looks to be the dual zone climate that is getting rid of it.

My Lariat in Canada does not have the recirc button...

Did a few changes a few weeks back with the beta version. - Seatbelt display dissappears when I plug my belt in. - Disabled TPMS for my winter wheels. (dont have sensors in the wheels yet.)

The mabett ones have a similar design. They won't scratch your paint either. Those ones look quite a bit "thicker" though.

I dunno...doesn't seem so smart anymore haha but that does suck! I had this happen once before with automatic wipers on my old car, but it didn't scratch anything.

Confirmed, it was my cable. Bought a cheap one...lesson learned. Got the OBDLINK, changed a few settings already.

Ecoboost Tried all the different settings. Followed my adapter manual as well. Weird... Bought a new adapter. Will try when it gets here.

I still am getting the same message.

I totally agree! I have a set of X-Ice in my garage without TPMS. I was going to wait until I can turn off the TPMS on forscaen before installing them. I'm in less of a rush now, because of the stock 19" tires. -26C here with lots of snow.

Ended up just ordering a trifold cover. It seems to seal a little better. Especially on the tailgate.

Ended up going back and trying to fit it a little better. I just want it to be as water resistant as possible and this seems to be a major issue with this cover. It doesn't actually overlap on the back tailgate at all, leaving a gap for water to come in. Also near the back tailgate their is...

Just tried the beta in my Ecoboost 2025. Just get this error.

Tried installing my factory Ford Hard roll up last night and had some problems. 1.) the tonneau rails don't seem to go on flush to the truck rail, they angle down into the bed slightly. Do I have to remove the angled shims from the rails? 2.) because of that the middle of the cover near the...

It takes very little heat to pell them off. Think of them as a sticker. It is below freezing here, and just a slight bit of heat made it come right off. Basically just used it to get an edge up and then peeled it off.

I'm going to as well, but I think we might have to also change Forscan to flat eq. I read another thread that the vocals seem to suffer. https://www.mavericktruckclub.com/forum/threads/b-o-center-channel-speaker.27348/post-509532

I'd love to figure out a way to get rid of the center channel or calm it a bit. I have the 2025 B&O and it is just a werid sound. I feel as though it is sometimes "echoy".