Search results

As of last Friday, my dealer didn't have any instructions or parts to do the recall. I'll be checking with them sometime in the future. Probably after I get the recall letter from Ford.

I have the recall notification on my Vehicle Dashboard. I'll ask the service writer about it when I drop my Mav off for the oil change that I have scheduled this Friday (tomorrow). Hopefully the hood struts that I added won't get in the way of the cowl removal... I'll have to preemptively...

I typically go with A since my round-trip commute is under 10 miles a day. My last fill (last night) went a little longer than I normally go as I got down to 10miles left by the time I pulled into the gas station (and was doing everything I could to stay on Electric mode on the way to the gas...

Is Ford bringing back the opening in the back window? I thought they got rid of that for the '24 models, but I'm too lazy to double check at the moment...

Had it for about 11 months, only 5725 on the odometer even though it's my daily driver. But my commute is only about 4-5 miles each way (depending on the route)... See my .sig for exact purchase date and latest Fuelly stats. Mileage on Fuelly should start going up now that it's summer, but those...

This one showed up on my recall list. I've already made an appointment for tomorrow morning (dropping off tonight) for the previous two recalls that I finally got around to scheduling. (Turn signal outage detection & ipc illumination.) I'll make sure I mention all 3 recalls on the drop-off form...

I've just developed a habit of hitting the button when I start up. If I haven't cleared the other startup nag screens it is 5 presses. If I have cleared the startup nag screens it is 4 presses. I don't know why... I drove from northern Delaware to Eire, PA for the eclipse on ECO and got 40.3MPG...

Hey, neighbor. I basically grew up in Kennett Square, and now live in Wilmington, DE area. If you see a blue Mav with a hobbit front plate tooling around, that's me. I recently noticed a Mav parked in another driveway in my neighborhood (only about 2 blocks from my driveway), but haven't gotten...

I recently installed a pitaka Magsafe Car Mount and haven't had any issues with it yet. My phone is a Pixel 8 Pro in a dbrand grip case that provides the magnets. Granted, I pretty much only drive on smooth pavement (Delaware roads are in general pretty good quality, though my major comparison...

Convenient of Ford to bury the positive that you are supposed to use (with the red cover) under a big, fat cable but leave the positive that you aren't supposed to use (with the black cover) easily accessible. Yet another example of vehicle designers not taking into account accessibility for...

The locking gas door on the hybrid has nothing to do with fuel security. During normal operation the gas tank on the hybrid is pressurized so the locking gas door on the hybrid is to cap the fill tube to maintain the pressure (especially since Ford seems to like their cap-less fuel fillers)...

Thanx for the reminder. Yes, I'll want it ignition switched. As I recall AcroHD has a good install video that I'll be referencing.

I ended up going with the iCrimp IW-3220M because of the linear movement of the crimping dies. Here are close up pictures of my first test crimp onto 24AWG wire. Not bad at all for a $25 crimper. Now that I have all the parts (I received the AcroHD cubby insert today), I'll try to find some...

I agree with others to get the GB40 from amazon, only a hundred bucks. I have one that I got when my old Saturn's dashbord sounder died and I started killing my battery by forgetting to turn my headlights off. It worked a treat. It currently lives under my back seat in my Mav, but I haven't had...

I got the pitaka Air Vent Phone Holder for Car with Cooling Fan for mine, but I haven't installed it yet so no pictures yet. I'm expecting my AcroHD cubby mount to arrive tomorrow. I've already gotten all the other bits for installing USB ports in the bottom of the AcroHD cubby mount so I don't...

That last one that I highlighted in red probably won't work with the bed extender. It might, but when I was originally ordering and playing around with options (before I decided to order my bolt-on options separate from my truck to avoid build delays) I think I recall the order builder...

Yeah, I discovered this the hard way. It was only the locater part (holds the connector in the crimper to align with the punch and anvils). I just initiated an RMA with Mouser. Thanx for the suggestions for alternate crimpers. I was going to ask if anyone had suggestions when I came to warn...

Sorry, I didn't respond to your previous question. I would have suggested Printables. ;-) I just found and followed you. You might want to add a link to your repository to your signature here to make it easier for fellow Mav owners with 3D printers to find your models (and hopefully increase...

Thank you for .step instead of .stl. Much easier to modify to fit our lumber choices a solid object than a mesh object. I plan on semi-permanently leaving a tall divider in the front of the bed (the slots closest to the cabin) to store tarps and other such items. Do you have this up on...

Amazon is your friend. Search for "6 inch USB charging cable" and you won't want for selection.