Sponsored

Search results

  1. FINALLY, FORScan coding to disable the Seatbelt Information Screen! (CONFIRMED WORKING)

    Worked perfectly on my 23 XL Hybrid. This has been driving me nuts since day one, now just need to figure out the ready to drive and lane keeping assist reminders. Thanks for sharing!!
  2. My DIY bed divider that doesn't rattle around

    Just finished creating a printables account and uploading my maverick stuff, thanks for the push.
  3. My DIY bed divider that doesn't rattle around

    Not really interested in selling them, print time is so long I don't think it would be worth it. There are other good ideas in this thread though.
  4. My DIY bed divider that doesn't rattle around

    Had been debating on what to do for a bedmat to keep things from sliding around on the SIBL and decided to goo with a tractor supply horse stall mat. Heavy and smelly but should hold up to anything. I mention this because the cutoffs seem like they would be perfect to add to the ends of a bed...
  5. Bed lights with on/off button and magnetic auto on switch - my DIY

    That would definitely kill the battery. I think once you rewire the switch to not have the illumination in you'll be set
  6. My DIY bed divider that doesn't rattle around

    Haven't gotten around to it yet. Which site would you recommend?
  7. Bed lights with on/off button and magnetic auto on switch - my DIY

    Lack of relay wouldn't be a problem. Does your switch have illumination when off? That could drain the battery. Otherwise probably not driving enough for how much time the tailgate is open, the breakaway charger isn't very fast. Mines been working fine so far. You could test the current and see...
  8. My DIY bed divider that doesn't rattle around

    Looks good, I am thinking of something similar if I find I want more height. Do the hooks work out to be high enough for grocery bags? Nice idea on the pipe insulation.
  9. My DIY bed divider that doesn't rattle around

    I thought about something like that, or maybe getting a horse stall mat as a bedmat and using a cutoff from that. I'm happy with how my solution worked out but it's certainly overly complicated. Might make something taller with hooks or holes for bungees but I'll try this out first, might not...
  10. My DIY bed divider that doesn't rattle around

    That would certainly be cheaper and easier. Still learning the CAD and 3d print software so looking for opportunities to customize the maverick and do that at the same time.
  11. My DIY bed divider that doesn't rattle around

    Just added the .step file to the original post. I based the dimensions on a piece of pressure treated decking that's been drying in my garage for a year or so so a fresh wet piece might be too tight.
  12. My DIY bed divider that doesn't rattle around

    Got sick of everything sliding around in the bed so I decided to makeup a divider this weekend. I didn't like how sloppy the slots were for a 2x6 so I modeled and 3d printed some end caps and used a piece of 5/4 x 6 PT decking I had laying around, painted it black and put on the caps. It fits...
  13. New York Tailgate tiedown that works with tailgate assist strut

    My last tiedown is sold, now I'm really out. Thanks for looking.
  14. Bed lights with on/off button and magnetic auto on switch - my DIY

    Lights come on whenever I open the tailgate regardless of how long the truck has been sitting. If I were doing it again I might pick a little larger of a battery for more capacity since there is plenty of room but so far capacity has not been an issue. I believe the breakaway charger is...
  15. New York Tailgate tiedown that works with tailgate assist strut

    The only one I have left the chain loop is a little too low of an angle, this means the top screw has to go into the tiedown before attaching to the truck. Still will work and look fine once installed but the top screw needs to go in first. I did test fit this on my truck and it fit fine. I...
  16. Bed lights with on/off button and magnetic auto on switch - my DIY

    I did pretty much the same thing but the flexbed pigtails cutting power when the key was out of the ignition drove me nuts. I ended up adding a battery in one of the bed cubby's which charges via a breakaway battery charger when the truck is on, so far so good. Also won't be contributing to my...


Top