Sponsored

Recent content by Ksprelude01

  1. Ford Performance Exhaust for the Maverick - Ford OEM

    Has anyone tried this exhaust yet? Black https://www.ford.com/product/20222025-maverick-20l-sport-exhaust-black-p2824688244 Chrome https://www.ford.com/product/20222025-maverick-20l-sport-exhaust-chrome-p2824688243 With the 20% off its $796

  2. New Center Console Organizer 3D Print - Designed one to hold a tissue box with a large storage hidden under the tissue box, 3D Printed

    Picked up some more material to make more center console organizers. So for the ones that have been waiting let me know if you still interested. And for anyone else that is interested I have more material to make another run of them.

  3. How much does it cost to get the transmission, PTU, and RDU fluid changed?

    I over filled it 4.75 quarts. Drove it around for 15 min, i think my Torque app said the trans was 180F when i came back to check the fluid. Turn the wheels to the left and you can reach the fill level plug. I use the pump that I used for the PTU and RDU to pump a little extra fluid into the...

  4. How much does it cost to get the transmission, PTU, and RDU fluid changed?

    That's my plan to do it yearly. I just did mine a couple weeks ago while doing my oil change. I think it was $140 just for fluids to change the trans, PTU, and RDU. It took me a little over an hour to do. Just do it while doing an oil change since you have the bottom cover off anyways.

  5. Has anyone found a large cupholder accessory that will accomodate a 64 oz. insulated travel mug and fit in the Maverick?

    I can 3d print you one that would adapt the 64oz to the front cup holders.

  6. PSA: oil change on FX4 Maverick requires skid plate panels removal

    I just changed the Oil, Transmission, PTU, and RDU fluids this weekend for the first time since getting the truck a little over a month ago (32,000 miles). After pulling down the skid plate and seeing some rusty areas, I ended up drilling a few drain holes in those areas to help air out under...

  7. Little rant Recall - gas tank inspection

    Just got the truck back. They said the reason for the lost of communication to the fuel pump was because they forgot to reconnect a grounding wire. The shop foreman looked over everything before they confirmed it was all fixed and over everything else on the truck before they gave it the green...

  8. Little rant Recall - gas tank inspection

    Avoid Bo Beuckman Ford 15675 Manchester Rd, Ellisville, MO 63011 Thankfully there is several other dealership close by.

  9. Little rant Recall - gas tank inspection

    Took my truck in for state inspection and have them take care of the 7 recalls that were on my Maverick at the local Ford dealership last week Thursday and Friday. I got my truck back on Friday and found out I had a exhaust leak due to them miss aligning it when they had to take it off to...

  10. 2x6x55” boards don’t fit in bed sockets

    I'll second the 54 1/4". I used a 2x8 cut down to 6 1/2" so its the same height as the wheel wells. If you take a 1 1/2" triangle out of the bottom corners it will sit flat on the bed bottom.

  11. New Center Console Organizer 3D Print - Designed one to hold a tissue box with a large storage hidden under the tissue box, 3D Printed

    There is 3" tall by 5 3/4" by 6" inches of space left under the tissue box. There is taller sections in front or on the side of the tissue box as well. But ya i was going to put some dividers and hooks for keys but I thought leaving it blank would fit more of peoples needs

  12. Software Updates

    My android got an update but I don't have the software update tab

  13. New Center Console Organizer 3D Print - Designed one to hold a tissue box with a large storage hidden under the tissue box, 3D Printed

    There ya go FITS square tissue box holder. https://www.printables.com/model/1220576-ford-fits-square-tissue-box-holder Its $7 in material and electricity. $17 Plus shipping I can make it for you.

  14. New Center Console Organizer 3D Print - Designed one to hold a tissue box with a large storage hidden under the tissue box, 3D Printed

    I can make you one that just holds a square tissue box and attaches to the Fits mount

  15. Towing - Loose hitch in receiver on 4k tow package.

    Thats the design I was looking at getting. Its cheap enough to give it a try at least.
See more




Top