New Hood Blackout Decals Available.

[VinylImagination]

We have had several requests for a hood blackout covering the main hood section, rather than just the center.
We think this will assist those of you that experience glare from you hood while driving.
We recommend purchasing this in Wrap material 3M 2080, Avery SW900, Oracal 970RA, this material will form to the deeper recesses, and a bubble-free install on a larger graphic like this.

PRICING, MATERIALS & COLORS AVAILABLE HERE

Literally available in hundreds of colors, and color combinations.

If you want a new style in this design, please get in touch with us, text us, PM us, email us.

As always, discounts are available for Maverick Truck Club members, send us a PM for your discount code.

Thanks for looking.

Sponsored

 

[LSchicago]

For a plain decal those sure are pricey.

 

[VinylImagination]

For a plain decal those sure are pricey.

It's the size, not the complexity.
This is essentially a precision precut hood wrap. You will not have to try to trim along the hood lines using masking tape, knifeless tape, etc.
Will be produced in the highest quality Cast vinyl, in a wide choice of colors. in either Dry-Install or Wet-Install.

Don't forget MTC Members also receive a Discount.

 

[surfstar]

To simply eliminate the glare - this needs to be made in a negative of the current offering above. Matte black and there ya go.

Our first road trip I couldn't believe how bad the glare was off the hood design. Seemed like a miss during development. But sun angle has changed and the issue hasn't been back since, but I know it will happen again.

 

[VinylImagination]

To simply eliminate the glare - this needs to be made in a negative of the current offering above. Matte black and there ya go.

Our first road trip I couldn't believe how bad the glare was off the hood design. Seemed like a miss during development. But sun angle has changed and the issue hasn't been back since, but I know it will happen again.

Like we said, it is available in literally hundreds of colors, and Matte Black is an option.
As as well as Matte Metallic Gray, Matte Metallic Blue etc.

 

[XLTLUXRED]

Does this fit if you have a hood protector?
Hard to install yourself?

 

[Fast Mavericks]

That’s pretty cool. If I hadn’t wrapped mine I’d get one.

 

[Mdmac]

Hello,
I did not see the cost but how much for the Matte Black for 2023 Maverick? I am also a Maverick Truck Club Member. Thank you

 

[Aherpa]

We have had several requests for a hood blackout covering the main hood section, rather than just the center.
We think this will assist those of you that experience glare from you hood while driving.
We recommend purchasing this in Wrap material 3M 2080, Avery SW900, Oracal 970RA, this material will form to the deeper recesses, and a bubble-free install on a larger graphic like this.

AVAILABLE HERE

Literally available in hundreds of colors, and color combinations.

If you want a new style in this design, please get in touch with us, text us, PM us, email us.

As always, discounts are available for Maverick Truck Club members, send us a PM for your discount code.

Thanks for looking.

I'm a fan of fighter aircraft, but putting a huge flat decal on the whole hood of my truck, is not for me. The glare issue I get is from the small 'hills' that drop the center hood (highlighted in yellow below). The rest of the hood does not bother me cause it drops away enough, but those long small flats sure do catch the sun.
I would be interested in a set in flat cactus grey. Do you make those?

Thanks

 

[VinylImagination]

Hello,
I did not see the cost but how much for the Matte Black for 2023 Maverick? I am also a Maverick Truck Club Member. Thank you

Pricing varies by color / material.
You can price what you want here...

https://vinylimagination.com/pages/...2/maverick-22-main-hood-blackout-graphics.php

 

[VinylImagination]

I'm a fan of fighter aircraft, but putting a huge flat decal on the whole hood of my truck, is not for me. The glare issue I get is from the small 'hills' that drop the center hood (highlighted in yellow below). The rest of the hood does not bother me cause it drops away enough, but those long small flats sure do catch the sun.
I would be interested in a set in flat cactus grey. Do you make those?

Thanks

Hi,
We have the graphics you want available here...
https://vinylimagination.com/pages/...maverick-22-hood-inner-cowl-spear-stripes.php

 

[VinylImagination]

Does this fit if you have a hood protector?
Hard to install yourself?

It should fit as placement of the vinyl should be well back from the hood deflector/ protector. If you send a picture, we will confirm for you.

 

[TORQUERULES]

Hi,
We have the graphics you want available here...
https://vinylimagination.com/pages/...maverick-22-hood-inner-cowl-spear-stripes.php

What method (wet vs. dry) and what brand do you recommend here?

 

[VinylImagination]

What method (wet vs. dry) and what brand do you recommend here?

Hi,
For this graphic we would recommend dry-install method, with wrap material 3M 2080 or Avery SW900. As you are essentially wrapping 3/4 of the hood.
Regarding brand, we offer 3M, Avery, and Orafol, they are all comparable materials regarding durability.
3M 2080 is basically the industry standard and the most recognized brand.

Sponsored