3D Printed Tailgate Hole Caps

[P99Guy]

Good thing I didn’t start selling them. I was going to sell for a hefty profit

I was hoping you would so I didn’t have to. As soon as you do I will stop.
Once I retire in March they will have to go up as then it will be a nuisance.

Sponsored

 

[gunnmitten]

Jeez, I can't believe people are bitching about the price.

they're always more than welcome to buy a printer, supplies, and do all the post-print finagling for that lower price they're looking for lmaoo **or just use a local printing service with the freely downloadable files.....some people just like to complain whatchagondo

 

[gunnmitten]

Everyone, I am really trying to get the price back down on these.
Thanks for the support!

Logistics are the make or break for so many supply lines, good on you for trying to do good for a community that frequently likes to make it obvious they don't deserve nice things

 

[AMCfoxbody]

Got my 1-piece vented cover in the mail today. Great quality and fit. I very much appreciated the letter that was included with the package as well. @P99Guy is a stand-up dude and one of the good ones out there! Thank you for what you are doing for the Community!

 

[OneHappyTremor]

Thank you soooooo much P99Guy! translucent cover plate fits and looks EXCELLENT on my Oxford White tailgate (should I need to lift up my Bedrug cover…)!!! I was glad to get rid of the 1/2 photo-magnet sheet, 1/2 Rockauto magnet and replace with your very professional looking, quality cover plate!

I feel that your plate is EASILY worth $15, maybe even a dollar or two above that, even if you’re only doing this to aid the MTC & Mav communities! Really - $10 really is too cheap (but, what a great deal at that low price)!

Now, when will you be printing up snap-in Maverick-logo hitch covers…?

 

[RichardCranium]

I kind of dig your RockAuto cover.

can’t sell anything with the MAVERICK logo, due to copyright. Neat idea though

 

[Moline]

Covers are available again.

Tried to order today but would not allow shipping to SoCal??
Lmk
Want one!! Good job

Thanks

 

[P99Guy]

Thank you soooooo much P99Guy! translucent cover plate fits and looks EXCELLENT on my Oxford White tailgate (should I need to lift up my Bedrug cover…)!!! I was glad to get rid of the 1/2 photo-magnet sheet, 1/2 Rockauto magnet and replace with your very professional looking, quality cover plate!

I feel that your plate is EASILY worth $15, maybe even a dollar or two above that, even if you’re only doing this to aid the MTC & Mav communities! Really - $10 really is too cheap (but, what a great deal at that low price)!

Now, when will you be printing up snap-in Maverick-logo hitch covers…?

Thank you for posting! Glad to hear it worked well. The real test is always the Consumer no matter how hard you try. BTW, I am going to do White as well but it will be a week or so before I catch up again. If I go to $50 maybe I can quit my day job..... just kidding.

 

[P99Guy]

Got my 1-piece vented cover in the mail today. Great quality and fit. I very much appreciated the letter that was included with the package as well. @P99Guy is a stand-up dude and one of the good ones out there! Thank you for what you are doing for the Community!

Thank you for the post. Glad to hear it made it in 1 piece. I was worried with the cheap packaging I had to use.

 

[P99Guy]

Tried to order today but would not allow shipping to SoCal??
Lmk
Want one!! Good job

Thanks

The square site should not care where you want it sent. I input that information on the labels manually after the order is placed.

Shoot me a private message and I will take a look.
Thanks.

 

[P99Guy]

ALL.
Those of you checking the sales site for shipping updates. The status will never change as I do not yet pay Square for that feature. I would have to increase the price of the covers to have a real site.

All orders placed before the 9th were mailed on the 9th and 10th and should be arriving to you soon. They were sent as first class mail and not a parcel to save costs.

Current orders are being processed as they come in. Unless I have to print covers for the order they will go out next day.

It takes me 2 hours and 4 minutes to print 3 covers and I am only able to print a bout 3-4 sets per day due to my day job.

For those of you I promised tracking numbers (only recent orders) I have discovered that even though i have them from the post office it is almost impossible for me to match up who was who with my current system. I will work on it again tomorrow. Just be assured your covers have been mailed.

David
@P99Guy

 

[nunyabz]

Thank You @P99Guy... I received the 1 piece black cover and it snapped in perfectly. Awesome product and Awesome service. Kudos for correcting what Ford should have done in the first place! : )

 

[Milous]

P99Guy,
Received your tailgate cover today and installed it. 100% perfect fit and top notch quality! Thank you, very much appreciated.

 

[P99Guy]

P99Guy,
Received your tailgate cover today and installed it. 100% perfect fit and top notch quality! Thank you, very much appreciated.

Thank you for the update and the purchase!
D

Sponsored